• The fluid flowing within a transmission services a few different purposes. To start, it lubricates the system gears to ensure the smooth shift. Additionally, the fluid works to keep the system at a cooler temperature and prevent an overheating engine. While the fluid courses through the engine, it is heated up gradually. During this process, the fluid is also sent through it, through the coolant lines and into the radiator where the process starts all over again. If you have a coolant leak, the lines must be replaced or else risk the possibility of severe engine damage. Thankfully, this transmission repair can be completed with only a handful of tools and an hour of work.

     

    Step 1 - The front of the automobile should be raised up on a couple of jack stands in order to start transmission repair. If you've been running the engine recently, allow a period of 30 minutes to pass before moving any further. Hot metal and fluids can easily singe the skin.

     

    Step 2 - Position yourself beneath the vehicle and find the location of the drain pan. You'll know you're in the right spot when you see a large, metal tank with a series of bolts surrounding it. Position a collection pan underneath the drainage bolt in the center. You'll want to make sure that the pan used is big enough to hold all of the transmission fluid currently in your vehicle.

     

    Step 3 - Unscrew the drain bolt using a socket wrench. Sit tight for 10 to 20 minutes to ensure that all of the fluid has been drained from the pan. Replace the bolt using the socket wrench.

     

    Step 4 - Pop open the hood and find the two coolant lines running from the radiator to the side of it. The lines are larger vinyl hoses secured by metal clamps.

     

    Step 5 - The lines should be detached from the it with a flare nut wrench. Position the wrench's open end over the line and move it down toward the bolt that connects to the line. Once in place, you need only twist the wrench to remove.

     

    Step 6 - Remove each line from it. Follow your lines to the radiator connection and remove with the aid of your trusty flare nut wrench. Tug the lines free.

     

    Step 7 - Unwrap your new transmission lines from the packaging and attach them to the radiator and transmission. Utilize that trusty flare nut wrench one last time to secure the bolt that connects each line to it and radiator.

     

    Step 8 - Find the dipstick for it above the drain pan. Remove the dipstick from it's designated spot and position a funnel into the tube Autel MaxiSys MS906BT. Check your vehicle's owner's manual to find out how much fluid is required for your system. Keep checking as you fill to ensure you add the correct amount. Place the dipstick back into it's proper spot and shut the hood. Start your vehicle and check for leaks. If you've completed the transmission repair correctly Autel MaxiDiag MD808, you should be good to go!


    Related Links
    http://autorepairtool.podbean.com/


    votre commentaire
  • Protecting the interior and exterior of your pickup truck is a must if you plan to conserve the vehicle for long or short term. Toyota Tundra Protection accessories are basic aftermarket accessories to safeguard your vehicle from theft, wear and tear, and exposure from unseen elements beyond your control Autel Maxisys MS908CV. Don't be penny wise and dollar foolish when it comes to your truck! Take one step forward by exploring some must-have Toyota Tundra aftermarket accessories to help safeguard the inside, as well as the outside of your full size pickup truck.

     

    Automotive pilferage is on the rise, and the Toyota Tundra is not immune from theft. Your factory or aftermarket wheels, tailgate, interior components and even the truck as a whole are in hot demand and hot target by thieves. No matter how confident or comfortable you are, your vehicle can be had with a simple blink of the eye. A simple and recommended way to safeguarding your vehicle is to add aftermarket protection accessories. Auto alarm pager is a low-cost aftermarket accessory to guard your Tundra from theft. Even if you have factory alarm installed on your vehicle, it is strongly recommended to at least protect your factory wheels and tailgate with locks.

     

    Outside of auto alarm, interior protection accessories are designed to safeguard and maintain the interior from daily wear and tear. For example, installing custom floor liners and bed liners can help you protect your factory carpet and bed respectively. There are other interior accessories that are functional and play integral parts to safeguard the inside of your pickup truck Autel MaxiTPMS PAD. Sunshade, dash covers, seat savers, backup alarm, backup sensor, dash covers and door entry sills are popular aftermarket accessories to consider if you want to preserve the life of your truck. If you are wondering why backup alarm or backup sensors were included, it is fair to say that they can help you avoid collision.

     

    Just as important, protecting your vehicle from stones, bugs and unknown or unforeseen elements are equally essential investments to undertake if you plan to preserve the value of your pickup truck. Popular aftermarket accessories to safeguard the exterior of your vehicle includes, paint protection film or bug and stone deflectors, window visors, head light and tail light guards, bull bars and mud flaps. It makes perfect sense and long term savings if you undertake any or mixture of these aftermarket accessories.

     

    It is not hard to defend or safeguard your investment. Toyota Tundra aftermarket protection accessories are installer friendly and inexpensive. If you consider for a minute, the cost of the truck and the inconvenience to replace the pickup and your valuables, you will agree with me that defending your truck before problem strikes, is the right thing to do, and the best economical investment to undertake.

     

    Don't wait till disaster strikes; do not wait for accident or incident to come to you, you go out and head it off at the pass. If the above strikes a cloud in your nerve, perhaps you can understand this; "Prevention is better than cure". Protecting your vehicle with Toyota Tundra aftermarket protection accessories is the best option if you want maximum resale or trade-in value for your vehicle.

    Jojo Brando has spent a lot of time learning about Toyota Tundra Accessories and other related topics. Read more about Toyota Tundra Must-Have Protection Accessories at
    Related Links
    http://autorepairtool.blog.fc2.com/


    votre commentaire
  • The torque converter is one of the least understood components in an automatic transmission equipped vehicle. I will attempt to explain what it does and how it does it.

    The torque converter has a few different functions.

    We first need to understand that there is no direct link between the crankshaft and the transmission input shaft (except in the case of a lock up style converter, but we'll talk about that later). This means that the first function of the converter is to connect the crankshaft and the input shaft so the engine can move the vehicle; this is accomplished through the utilization of a fluidic coupling effect Autel MaxiCOM MK808.

    The torque converter also replaces the clutch that is required in a manual transmission; this is how an automatic transmission vehicle can come to a stop while still being in gear without stalling the engine.

    The idea behind a higher stall torque converter is to allow the engine to rev more freely up to the point where the powerband begins, and therefore, enable the vehicle to accelerate from a stop under more power Autel MaxiSys MS906TS.

    This becomes increasingly important when an engine is modified. Engine modifications such as ported heads, bigger cams, bigger turbos (in some cases), bigger intakes, etc. tend to raise the point where the powerband begins. For best performance, the stall speed needs to be raised accordingly to work optimally in conjunction with the given vehicle alterations.

    Factors such as engine torque and the rpm at which it is greatest, differential gear ratio, vehicle weight, camshaft design, compression ratio, type of induction- forced or naturally aspirated, and a host of other variables all need to be taken into consideration. Be aware that the "off the shelf" type performance torque converters sold by some manufacturers are very unlikely to be optimized for all vehicles and their unique requirements.

     


    Related Links
    http://autoobdonline.blogger.ba/


    votre commentaire
  • Own a car long enough and there's a good chance you'll develop auto problems of some nature. And one of the most common and most bothersome problems is vibration. What's more, it often creeps up on you gradually and subtly -- until one day you find yourself wondering how you ever put up with such an annoyance.

    Perhaps then you asked yourself, what does it mean if my car is vibrating? While there's no substitute for the assessment of someone with an extensive automotive background, you can develop a good feel yourself for diagnosing car problems that are relatively common, such as vibrations.

    One or more wheels may suffer from excessive "play Autel MaxiCOM MK808," or wobbliness, at the hub itself. The diagnosis and cure for this is pretty involved, as it could point to any of a number of issues. First, let's just assume that each wheel is fastened securely to its hub with properly torqued lug nuts.

    With that out of the way, the solution to a shaky wheel might entail replacing the wheel bearings. On most modern vehicles, wheel bearings are meant to last the life of the car or truck. But as you may already know, if you subject your vehicle to worse-than-typical wear-and-tear (off-roading, extremely hard driving, high mileage), it's not unheard-of for bearings to wear out.

    Sometimes it isn't the tires autel maxisys ms906, but rather the wheels they're wrapped around that cause your car or truck to vibrate when driven. Watch out for potholes and sloppy road repairs which can both be equally hazardous to your wheels.

    Also, keep in mind that these five reasons your car is vibrating aren't the only possible culprits. When in doubt, it's always a good idea to see an automotive service professional.

    Related Links
    http://www.fropper.com/ezBlog/autorepairtool


    votre commentaire
  • The most recurring maintenance issue that a vehicle owner has to deal with is tire care. This is because it is quite normal for tires to wear out after constant usage and then they have to be replaced with new ones. However, there are many things that you as a vehicle owner can do to extend the lives of the tires and make use of them more efficiently. While this not only saves you time, money and effort, you are also having a positive effect on the environment. Using more new tires means more old ones go to recycling centers and more energy is expended in producing new tires and recycling. So follow the tips below and see how you can use your vehicle tires better and for longer.

     

    Some Maintenance Tips

     

    A. Maintaining proper tire inflation - A tire that is highly inflated increases stiffness in the tires, which may create unwanted vibration. On the other hand, an under inflated tire, is even more serious, resulting in ‘blowouts' that can lead to a sudden loss of control of the vehicle and accidents. Therefore, the best thing is to maintain the proper inflation pressure at the level mentioned in the Owner's Manual autel, by using accurate tire pressure gauges Autel Maxisys MS908CV, when the tires are cool.

     

    B. Proper Alignment of Wheels - The way the wheels are set in position relative to the axes of the vehicle is called the wheel alignment and if the alignment is not proper, then the tires will not move freely and instead tend to drag. This will not only cause immediate problems in driving the vehicle but also increase the amount of fuel needed, at the same time reducing tire life. Again, get the alignment checked and adjusted to the specifications mentioned in the Owner's Manual.

     

    C. Proper Balancing of Tires - If the tire is to run freely and without too much wear and tear, the entire weight of the tire plus the wheel must be uniformly distributed over the circumference of the tire. If not, tires tend to wear more in the heavy spots. Anytime a new tire is put in or a flat tire is repaired, it is best to check and adjust the balancing of the tire.

     

    D. Regular Rotation of Tires - Obviously, not all tires are used in the same manner and to the same extent as others. For example, the front tires tend to work harder because they have to handle the steering action as well as the rolling wear. By regularly rotating tires so that front tires become back and back tires become front, will invariably allow them to run longer. If you also own a full-size spare tire, remember to include that too in your rotation pattern. Follow the rotation patter mentioned in your Owner's Manual.

     

    E. Proper Storage of Tires - If tires are not to be used for a long duration, then it is essential that they be stored in a proper manner. The best way of storing tires is to keep them upright in clean conditions where there is no sunlight or even very strong artificial light, no heat, no moisture, no ozone (as from electrical motors) and also hydrocarbons.

     

    Following these very simple steps regularly and taking your tires for regular inspection will ensure a long and healthy life for them and your vehicle, and safe riding for you.

    Learn more and save more about by reading our articles about car loans and travel and vacation deals for car travlers.
    Related Links
    http://autorepairtool.bloggersdelight.dk/


    votre commentaire



    Suivre le flux RSS des articles
    Suivre le flux RSS des commentaires